Power gains of up to 100hp!

This plug and play tuner attaches to easy to access sensors in the engine bay and works with your factory ECU tuning to remap your boost, timing, and fueling for optimal performance and reduced turbo lag.

Installation is very discrete and unlike flash remaps which are quick to install but can never be fully removed with a JB4 the vehicle is never aware it’s making more than the factory boost or power levels. Fuel economy during normal driving is unchanged and it’s compatible with all driving modes.

Unlike other less advanced systems, the JB4 includes CANbus functionality allowing it to take in critical engine data directly from the ECU for real-time tuning. The data includes pedal position, throttle position, timing advance, fuel trims, air/fuel ratio, engine knock, fuel trims, gear, and much more. Other tuners without CANbus are not able to even monitor this critical engine data no less incorporate it real-time into their tuning algorithms. CANbus allows the JB4 to provide huge power increases with unparalleled power delivery.

The JB4 includes multiple maps including those for 91 octane, 93 octane, factory tuning, VALET mode, E85 mixtures, and unleaded race gas. In addition, it offers boost by gear settings to improve launches, the ability to read and delete fault codes, and much more. The JB4 is made in the USA and includes a 5-year warranty.

Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit, or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. Separate JB4 Mobile app purchase also required.

Power gains of up to 60hp and 108Nm on a stock vehicle

The JB4 is an easy to install plug and play tuner that attaches to sensors in the engine bay and works with your factory ECU tuning to remap boost, timing, and fueling for optimal performance and reduced turbo lag. Includes full SENT sensor technology required for properly tuning the latest Porsche platforms. Includes full CANbus allowing the JB4 to access and incorporate all engine data in its tuning strategies, incorporate unique safety features such as keeping boost pressure low until oil and water are up to temperature to provide proper engine and turbo lubrication and drop to a low boost map if the engine starts to overheat, run lean, excessively knock, or over boost. Includes fuel control for ethanol mixture mapping. Fully compatible with JB4 mobile for on the fly map changes, data logging, firmware updates, and much more. Installation is very discrete and it is quickly removed without a trace when needed. Fuel economy during normal driving is unchanged. Compatible with all driving modes. Made in the USA. 5 year warranty.

Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit, or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. Separate JB4 Mobile app purchase also required.

Instant Horsepower and Torque Gains

The JB4 is a plug and play McLaren tuner that plugs into easy to access sensors in the engine bay and works with your factory ECU tuning to remap your boost, timing, and fueling for optimal performance and reduced turbo lag. It features a 64mhz processor allowing sensors to be sampled 800 times per second using dedicated 10-bit digital to analog converters, ensuring smooth and powerful performance.

Unlike other tuning systems, the JB4 includes a fully programmable CANbus system, upgradable firmware, and data logging capability. CANbus allows the JB4 to take into account pedal input, throttle position, gear, engine speed, air/fuel ratio, fuel trims, ignition advance, knock, and many other factors and incorporate those into the performance mapping. It can also read/delete fault codes, includes unique safety features such as keeping boost pressure low until oil and water is up to temperature to provide proper engine and turbo lucubration and drop to a low boost map if the engine starts to overheat, run lean, excessively knock, or over boost.

The JB4 offers a lot more performance, functionality, and safety than your average performance chip.

The default JB4 map1 runs 4psi over stock peak and tuned maps including stock and valet mode can be selected on the fly using a BMS diagnostics cable or JB4 mobile smartphone adapter.

Installation is very discrete, and it quickly removes without a trace when needed. Includes maps for 91 octane, 93 octane, and E85 (ethanol fuel) mixtures. Fuel economy during normal driving is unchanged. Compatible with all driving modes. Made in USA. 5 year warranty.

Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS, and Android device via the JB4 Mobile connect kit or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. A separate JB4 Mobile app purchase is also required.

Gains are up to 100hp on pump gas and up to 207hp on higher octane or E85 mixtures.

The ultimate tune for your 4.4L S68 powered BMW, the JB4 allows you to go from factory stock to full race and everywhere in between. The JB4 installs and removes easily and includes many unique features not found in any other tune, including user-adjustable 1st and 2nd gear boost limiting, smartphone integration, electronic wastegate control, ethanol fuel support, and built-in advanced CANbus-based diagnostic tools. Installation is easy and completely removable with no splicing or cutting of factory wires making the JB4 an excellent choice for your S68 engine.

Wirelessly connect the S68 JB4 to your Bluetooth 4.0 compatible iOS and Android® device via the JB4 Mobile connect kit or to your Windows® laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update S68 JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. A separate JB4 Mobile app purchase is also required.